Research Paper: Fabrication and Study of Planar Waveguide Based on SU-8 Polymer using Different Substrates

Document Type : Research Paper

Authors

1 Assistant Professor, Photonics and Quantum Technologies Research School, Nuclear Science and Technology Research Institute (NSTRI), Tehran, Iran

2 Assistant Professor, Photonics and Quantum Technologies Research School, Nuclear Science and Technology Research Institute (NSTRI), Tehran, Iran.

Abstract

In this work, the planar waveguides are investigated by depositing a SU-8 polymer on PET and quartz substrates. Maxwell equations are solved for the designed waveguides to obtain the characteristic equations. By solving these equations, the minimum thickness of SU-8 necessary for operation as a waveguide is found. Afterward, the waveguides are fabricated and characterized by profilometry and UV-Vis-IR spectroscopy. It is observed that SU-8 polymer shows suitable optical transmission. Then, the effective refractive index of the waveguide, as well as the wave propagation, is recognized by the finite element method. The results of simulations show that the total reflectance phenomenon that is required for a waveguide operation is occurring more effectively in the PET/SU-8 device than in the Quartz/SU-8 and in a waveguide configuration, it possesses better performance. Also, the flexibility and low cost of PET make it a proper candidate for substitution of the typical rigid substrate such as quartz. 

Keywords

Main Subjects

References

[1] Agrawal, G. P. Lightwave Technology: Components and Devices.  (Wiley Wiley-Interscience (2004).
[2] Bakhla, N., Gangopadhyay, P. & Lakshmi, P. SU-8 Polymer as an Optical Waveguide for Integrated Optics. Journal of Electronic Design Technology 10, 20-26 (2019).
[3] Panusa, G., Pu, Y., Wang, J., Moser, C. & Psaltis, D. Fabrication of Sub-Micron Polymer Waveguides through Two-Photon Polymerization in Polydimethylsiloxane. Polymers 12, 2485 (2020).
[4] Dangel, R. et al. Polymer Waveguides Enabling Scalable Low-Loss Adiabatic Optical Coupling for Silicon Photonics. IEEE Journal of Selected Topics in Quantum Electronics 24, 1-11 (2018).
[5] Bamiedakis, N., Shi, F., Chu, D., Penty, R. V. & White, I. H. High-Speed Data Transmission Over Flexible Multimode Polymer Waveguides Under Flexure. IEEE Photonics Technology Letters 30, 1329-1332 (2018).
[6] Barwicz, T. et al. Advances in Interfacing Optical Fibers to Nanophotonic Waveguides Via Mechanically Compliant Polymer Waveguides. IEEE Journal of Selected Topics in Quantum Electronics 26, 1-12 (2020).
[7] Fischbec, G., Moosburger, R., Topper, M., Petermann, K. Design concept for singlemode polymer waveguides.Electronics Letters  32, 212–213 (1996). [8] Imanura, S., Yoshimura, R., Izawa, T. Polymer channel waveguides with low loss at 1.3 μm. Electronics Letters  27, 1342–1343 (1991).
[9] Prajzler, V., Nekvindová, P., Hyps, P., Jerabek, V., Properties of the Optical Planar Polymer Waveguides Deposited on Printed Circuit Boards. Radioengineering 24, 442-448 (2015).
[10] Ma, H., Jen, A.K.Y., Dalton, L.R. Polymer based optical waveguides: Materials, processing and devices. Advanced Materials 14, 1339–1365(2002).
[11] Eldada, L. Optical communication components. Review of Scientific Instruments 75, 575–593 (2004).
[12] Eldada, L., Shacklette, L.W. Advances in polymerintegrated optics. IEEE Journal of Selected Topics in QuantumElectronics 6, 54–68 (2000).
[13] Yeniay, A., Gao, R.Y., Takayama, K., Gao, R.F., Garito, A.F. Ultra-low-loss polymer waveguides. Journal of Lightwave Technology 22, 154–158 (2004).
[14] Feng, R. & Farris, R. J. Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings. Journal of Micromechanics and Microengineering 13, 80-88 (2002).
[15] Beche, B., Pelletier, N., Gaviot, E., Zyss, J. Single-mode TE00-TM00 optical waveguides on SU-8 polymer. Optics Communications 230, 91–94 (2004).
[16] Yang, B., Yang, L., Hu, R., Sheng, Z., Dai, D., Liu, Q., He, S. Fabrication and characterization of small optical ridge waveguides based on SU-8 polymer. Journal of Lightwave Technology 27 4091–4096 (2009).
[17] Prajzler, V., Lyutakov, O., Hüttel, I., Barna, J., Špirková, J., Nekvindová, P., Jeřábek, V. Simple way of fabrication of Epoxy Novolak Resin optical waveguides on silicon substrate. Physica Status Solidi C-Current Topics in Solid State Physics 8, 2942–2945 (2011).
[18] Prajzler, V., Nekvindová, P., Hyps, P., Lyutakov, O. & Jerabek, V. Flexible Polymer Planar Optical Waveguides. Radioengineering 23, 776-782 (2014).
[19] Bogaerts, W. et al. Basic structures for photonic integrated circuits in Silicon-on-insulator. Opt. Express 12, 1583-1591 (2004).
[20] Sharma, T. et al. Review of Recent Progress on Silicon Nitride-Based Photonic Integrated Circuits. IEEE Access 8, 195436-195446 (2020).
[21] Zilkie, A. J. et al. Multi-Micron Silicon Photonics Platform for Highly Manufacturable and Versatile Photonic Integrated Circuits. IEEE Journal of Selected Topics in Quantum Electronics 25, 1-13 (2019).
[22] Koren, U. in Optoelectronic Integration: Physics, Technology and Applications   (ed O. Wada)  233-272 (Springer US, 1994).
[23] Pollock, M. L. Integrated Photonics 2004th edition edn, (Springer, 2003).
[24] Prajzler, V. et al. Design, Fabrication and Properties of Rib Poly(methylmethacrylimide) Optical Waveguides. Radioengineering 20, 479 (2011).

Files

History

  • Receive Date: 12 April 2022
  • Revise Date: 29 May 2022
  • Accept Date: 17 August 2022

Share

How to cite

Statistics